Planning for Classroom Testing: Preparing Students, Taking Test and Test Anxiety

Preparing Students, Taking Test and Test Anxiety In Nursing Education

Preparing Students To Take A Test

A teacher-made test usually measures students’ maximum performance rather than their typical performance. For this reason, teachers should create conditions under which students will be able to demonstrate their best possible performance. These conditions include adequate preparation of students to take the test (Miller et al., 2009; Nitko & Brookhart, 2007).

Although this is the last point on the test-construction checklist (Exhibit 3.1), the teacher should begin preparing students to take the test at the time the test is scheduled. Adequate preparation includes information, skills, and attitudes that will facilitate students’ maximum performance on the test.

Information Needs

Students need information about the test to plan for effective preparation. They need sufficient time to prepare for a test, and the date and time of a test should be announced well in advance. Although many teachers believe that unannounced or “pop” tests motivate students to study more, there is no evidence to support this position. In fact, surprise (unscheduled) tests can be considered punitive or threatening and, as such, represent an unethical use of testing ( Nitko & Brookhart, 2007).

Adult learners with multiple responsibilities may need to make adjustments to their work and family responsibilities to have adequate study time, and generous notice of a planned test date will allow them to set their priorities.

In addition, students need to know about the conditions under which they are to be tested, such as how much time will be allocated, whether they will have access to resources such as textbooks, how many items will be included, the types of item formats that will be used, and if they need special tools or supplies to take the test, such as calculators, pencils, or black-ink pens (Miller et al., 2009).

They should also know what items and resources they will not be able to use during the test. For example, the teacher may direct students not to bring cell phones, personal digital assistants, chiming watches, and watches with calculators, backpacks, briefcases, or any books or papers to the testing site. Some teachers do not allow students to wear caps or hats with brims to discourage cheating.

In fact, such requirements may be good practice for prelicensure students who must observe similar restrictions for the NCLEX. Of course, students should also know what content will be covered on the test, how many items will be devoted to each content area, the cognitive level at which they will be expected to perform, and the types of items to expect.

As previously discussed, giving students a copy of the test blueprint and discussing it with them is an effective way for teachers to convey this information. Students should also have sufficient opportunity to practice the type of performance that will be tested. For example, if students will be expected to solve medication dose calculation problems without the use of a calculator, they should practice this type of calculation in class exercises or out-of-class assignments.

Students also need to know if spelling, grammar, punctuation, or organization will be considered in scoring open-ended items so that they can prepare accordingly. Finally, teachers should tell students how their test results will be used, including the weight assigned to the test score in grading (Miller et al., 2009; Nitko & Brookhart, 2007).

Another way that teachers can assist students in studying for a test is to have students prepare and use a “cheat sheet.” Although this term can be expected to have negative connotations for most teachers, cheat sheets are commonly used in nursing practice in the form of memory aids or triggers such as procedure checklists, pocket guides, and reminder sheets.

When legitimized for use in studying and test-taking, cheat sheets capitalize on the belief that although dishonest behavior must be discouraged, the skills associated with cheating can be powerful learning tools. When students intend to cheat on a test, they usually try to guess potential test items and prepare cheat sheets with the correct answers to those anticipated items.

Using this skill for a more honest purpose, the teacher can encourage all of the students to anticipate potential test items. In a test-preparation context, the teacher requires the students to develop a written cheat sheet that summarizes, prioritizes, condenses, and organizes content that they think is important and wish to remember during the test.

The teacher may set parameters such as the length of the cheat sheet—for example, one side of one sheet of 81/2 × 11-inch paper. The students bring their cheat sheets on the day of the test and may use them during the test; They submit their cheat sheets along with their test papers. Students who do not submit cheat sheets may be penalized by deducting points from their test scores or may not be permitted to take the test at all.

Some students may not even consult their cheat sheets during the test, but they still derive benefit from the preparation that goes into developing them. The teacher may also review the cheat sheets with students whose test scores are low to identify weaknesses in thinking that may have contributed to their errors. When used for this purpose, the cheat sheet becomes a powerful diagnostic and feedback tool.

Test-Taking Skills

Because of an increasingly diverse population of learners in every educational setting, including growing numbers of students for whom English is a second language and who’s testing experiences may be different from the teacher’s expectations; Teachers should determine if their students have adequate test-taking skills for the type of test to be given.

If the students lack adequate test-taking skills, their test scores may be lower than their current abilities. Skill in taking tests is sometimes called test wisdom. To be more precise, test wisdom is the ability to use test  taking skills, clues from poorly written test items, and test-taking experience to achieve a test score that is higher than the student’s true knowledge would predict.

Common errors made by item writers do allow some students to substitute testwiseness for knowledge. But, in general, all students should develop adequate test-taking skills so that they are not at a disadvantage when their scores are compared with those of more test wise individuals ( Nitko & Brookhart, 2007). Adequate test taking skills include the following abilities (Miller et al., 2009):

  1. Reading and listening to directions and following them accurately.
  2. Reading test items carefully.
  3. Recording answers to test items accurately and neatly.
  4. Avoiding physical and mental fatigue by paced study and adequate rest before the test rather than late-night cram sessions supplemented by stimulants.
  5. Using test time wisely and working at a pace that allows for careful reflection but also allows responding to all items that the student is likely to answer correctly.
  6. Bypassing difficult items and returning to them later.
  7. Making informed guesses rather than omitting answers.
  8. Outlining and organizing responses to essay items before beginning to write.
  9. Checking answers to test items for clerical errors and changing answers if a better response is indicated.

Many teachers advise students not to change their answers to test items, believing that the first response usually is the correct answer and that changing responses will not increase a student’s score. Research findings, however, do not support this position. Studies of answer changing and its effect on test performance have revealed that most students do change their answers to about 4% of test items and that approximately two thirds of answer changes become correct responses.

As item difficulty increases, however, this payoff decreases; Consequently, more knowledgeable students benefit more than less knowledgeable students from changing responses ( Nitko & Brookhart, 2007). Students should be encouraged to change their first response to any item when they have a good reason for making the change.

For example, a student who has a clearer understanding of an item after re-reading it, who later recalls additional information needed to answer the item, or who receives a clue to the correct answer from another item should not hesitate to change the first answer . Improvement in test scores should not be expected, however, when students change answers without a clear rationale for making the change.

Anxiety Test

Finally, teachers should prepare students to approach a test with helpful attitudes. Although anxiety is a common response to situations in which performance is evaluated, high levels of anxiety are likely to interfere with maximum performance (Miller et al., 2009). Whether some students can be characterized as test-anxious is a matter of frequent debate. Test anxiety can be viewed in several ways.

Students who are motivated to do well often experience increased emotional tension in response to a test. Their perceptions of the testing situation affect their thoughts during test preparation and test-taking. Students who perceive a test as a challenge usually have thoughts that are task-directed. They can focus on completing the task and easily manage any tension that is associated with it.

Some students perceive tests as threats because they have poor test-taking skills, inadequate knowledge, or both. These students often have task-irrelevant thoughts about testing. They focus on what could happen if they fail a test, and their feelings of helplessness cause them to desire to escape the situation ( Nitko & Brookhart, 2007).

Test anxiety can be characterized as a trait with three components: physical, emotional, and cognitive. Test-anxiety research suggests an interaction among these components: negative thoughts and perceptions about testing can create negative feelings, which interferes with performance (Poorman, Mastorovich , & Molcan , 2007).

The physical component, or autonomic reactivity, involves unpleasant feelings and reactions such as perspiration, increased heart rate, headaches, and gastrointestinal symptoms, although not all test-anxious individuals have physical reactions. The emotional component involves mood and feelings (eg, nervousness, uneasiness, fear, dread, panic) associated with testing situations.

The cognitive component refers to thoughts or concerns related to performance and its consequences, occurring before or during a test. Essentially, the cognitive component involves worry about possible negative outcomes: “catastrophic fantasies” about what might happen if the student fails, and “competitive worry” that other students are doing better (Poorman et al., 2007).

Cognitive indications of test anxiety include impaired ability to concentrate and easy distraction during the test, difficulty recalling information (“going blank”), misreading or misunderstanding directions or test items, and feeling pressured to be perfect. Additionally, individuals with true test anxiety often have a history of poor performance on tests and other evaluative situations, particularly high-stakes tests.

For example, these individuals may repeatedly fail a driver’s license examination or achieve good scores on quizzes or unit tests but fail final examinations (Poorman et al., 2007) the combination of negative feelings and thoughts often results in behaviors that interfere with students’ ability. to prepare adequately for a test.

One of the most dangerous behaviors is avoidance—procrastinating rather than beginning preparation early, and engaging in activities that seem to be related to preparing for the test but really are just distractions. For example, students often report that they studied for many hours and still failed a test, but a record of their activities would reveal that much of that time was spent highlighting material in the textbook or “preparing to study”—organizing their notes, doing household chores with the intention of minimizing interruptions, and so on.

Negative thinking creates anxiety, which students try to avoid by avoiding the studying that they believe is causing the discomfort (Poorman et al., 2007). Students whose test anxiety interferes with their performance often benefit from treatment that addresses the feeling or emotional component of anxiety and the negative thinking or worry aspect as well as training to improve their general test-taking skills.

For example, the test-anxious student may learn techniques for stopping negative thoughts during study periods and testing situations, and behavioral techniques such as progressive relaxation and visual imagery (Poorman et al., 2007). A more comprehensive discussion of the diagnosis and treatment of test anxiety are beyond the scope of this textbook.

However, teachers may be able to identify students whose performance suggests that test anxiety may be a factor, and to refer those students for treatment. Students need to view tests and other assessment procedures as opportunities to demonstrate what they know and what they can do. To foster this attitude, the teacher should express confidence in the students’ abilities to prepare for and perform well on an upcoming test.

It may be helpful for the teacher to ask the students what would help them to feel more relaxed and less anxious before and during a test. Conducting a review session, giving practice items similar to those that will be used on the test, and not talking or interrupting students during a test are examples of strategies that are likely to reduce students’ anxiety to manageable levels (Miller et al., 2009 ; Nitko & Brookhart, 2007).

Conclusion

Teachers who leave little time for adequate preparation often produce tests that contain poorly chosen and poorly written test items. Sufficient planning for test construction before the item-writing phase begins, followed by careful criticism of the completed test by other teachers, is likely to produce a test that will yield more valid results.

All decisions involved in planning a test should be based on a teacher’s knowledge of the purpose of the test and relevant characteristics of the population of learners to be tested. The purpose for the test involves why it is to be given, what it is supposed to measure, and how the test scores will be used. A teacher’s knowledge of the population that will be tested will be useful in selecting the item formats to be used, determining the length of the test and the testing time required procedures, and selecting the appropriate scoring.

The students’ English language literacy, visual acuity, and previous testing experience are examples of factors that might influence these decisions. The length of the test is an important factor that is related to its purpose, the abilities of the students, the item formats that will be used, the amount of testing time available, and the desired reliability of the test scores.

The desired difficulty of the test and its ability to differentiate among various levels of performance are affected by the purpose of the test and the way in which the scores will be interpreted and used. A test with a variety of item formats usually provides students with more opportunity to demonstrate their competence than a test with only one item format. Test items may be classified as selected-response or constructed-response types, depending on the task required of the learner.

All item formats have advantages and limitations. Teachers should select item formats based on a variety of factors, such as the objectives, specific skill to be measured, and the ability level of the students. Many objectives are better measured with certain item formats. Decisions about what scoring procedure or procedures to use are somewhat dependent on the choice of item formats.

Student responses to some item formats must be hand-scored, whether they are recorded directly on the test itself or on a separate answer sheet or in a booklet. The teacher should decide whether the time and resources available for scoring a test suggest that hand-scoring or machine-scoring would be preferable.

The best way to ensure measurement validity of a teacher-constructed test is to develop a test blueprint, also known as a test plan or a table of specifications, before building the test itself. The elements of a test blueprint include:

(a) a list of the major topics or instructional objectives that the test will cover.

(b) the level of complexity of the task to be assessed.

(c) the emphasis each topic will have, indicated by number or percentage of items or points.

The test blueprint serves several important functions. It is a useful tool for guiding the work of the item writer so that sufficient items are developed at the appropriate level to test important content areas and objectives. The blueprint should also be used to inform students about the nature of the test and how they should prepare for it.

After developing the test blueprint, the teacher writes the test items that correspond to it. Regardless of the selected item formats, the teacher should follow some general rules that contribute to the development of high-quality test items. Those rules were discussed in the chapter.

Because teacher-made tests typically measure students’ maximum performance rather than their typical performance, teachers should create conditions under which students will be able to demonstrate their best possible performance. These conditions include adequate preparation of the students to take the test. Adequate preparation includes information, skills, and attitudes that will facilitate students’ maximum performance on the test.

Leave a Comment